Rod Building Tools & Accessories

Tapered Cork Reamer
Article code XTCRL
$9.95
in stock
Medium and Large tapered reamers for cork fly rod grips.
Rod Tube Cap
Article code XLRTT1
$6.95
out of stock
LandMark Rod Tube Caps, Replacement 1 5/8 or 2" caps for Landmark aluminum rod tubes.
FLEX COAT
Sable Brushes
Article code XFSB8
$7.95
in stock
The finest pure red sable brushes available.
FLEX COAT
Sable Brushes
$7.95
FLEX COAT
Finishing Motors
Article code XFFM
$85.95
in stock
Commercial quality U.S. built gear motor for applying and curing epoxy finishes.
FLEX COAT
Finishing Motors
$85.95
FLEX COAT
Cork Grip Pilot Drill Bit
Article code XFC0238
$16.95
in stock
The pilot drill bit guides itself through a pre-existing hole in order to increase the diameter.
FLEX COAT
Color Coded Syringes - 2 Pack
Article code XF005
$2.25
in stock
Reusable 3 cc syringes and 12 cc syringes guarantee accurate measurement of Flex Coat 50/50 mix with no silicone contamination risk.
FLEX COAT
White China Markers
Article code XWCM
$1.95
in stock
White China Markers are great for marking splines and guide spacings directly on the blank.
FLEX COAT
Utility Knife
Article code XFUK
$4.95
in stock
Indispensable for trimming thread tie-offs. Useful in removing damaged guides in rod repair. Comes with 6 surgically sharp steel blades and safety cover.
FLEX COAT
Utility Knife
$4.95
FLEX COAT
Mixing Cups / Sticks 10 pack
Article code XF007
$3.45
in stock
Flex Coat Mixing Cups and sticks, a 10 pack of 1 ounce mixing cups with 10 mixing sticks.
FLEX COAT
Hand Rod Wrapper
Article code XFHRW
$78.95
in stock
This highly versatile rod wrapper is designed to do precision wrapping. With two tension devices and adjustable thread feed, this is the most popular unit for custom rod builders.
FLEX COAT
Hand Rod Wrapper
$78.95
FLEX COAT
Extra Fine Lettering Pen
Article code XLP
$3.95
in stock
Flex Coat Extra Fine Letting Pen, This lettering pen provides a striking method of writing on a rod blank. For use with water-based inks and metallic enamel paints.
FLEX COAT
Color Preserver
Article code XFCP
$2.45
in stock
Use before applying the epoxy finishes to seal wraps and preserve thread color
FLEX COAT
Brushes-3 Pack
Article code XFCB
$1.50
in stock
Very low cost, quality rod finishing brushes. Great for applying Flex Coat Rod Finish and Color Preserver
FLEX COAT
Brushes-3 Pack
$1.50
FLEX COAT
Brush Cleaner
Article code XFBC
$4.95
in stock
Use for cleaning all two part finishes from brushes. Also good for cleaning up epoxy mistakes on the rods.
FLEX COAT
Brush Cleaner
$4.95
FLEX COAT
1/2" Reamer Abrasive Roll
Article code XF009
$16.95
in stock
This industrial abrasive is a 36 grit aluminum oxide on a heavy resin bonded cloth which is perfect for gluing to rod blanks to make extremely durable power reamers or hand reamers.